NTN 7315BG angular contact ball bearings

Unit Body Material:Cast Iron; Rolling Element Material:Bearing Steel; Grease Type:Standard Grease; Basic Load Rating, Dynamic Rating(N):52400; Accessory:No Cover; Bearing Unit, Type:Square flange shape; Unit, Type:Insert Bearing Unit; Surface Treatment:No; Rolling Element Material:Bearing Steel; d:5

ra max:0.3 mm; f0:13.2; Static load, C0:2.39 kN; Mass:0.02 kg; rs min:0.3 mm; da min:14 mm; Characteristic outer ring frequency, BPF0:3.07 Hz; Characteristic rolling element frequency, BSF:4.07 Hz; Min operating temperature, Tmin:-25 °C; Radial clearance class:CN;

Weight:5.490 lb; Total Width A:2.031 in; Center of Bearing from End S:21.5 mm; Static Load Rating:4460 lbf; Dimension L1:59.8 mm; Inside Ring Width B:=Bearings1_Inside Ri; Base to Center Height H:49.21 mm; Series:Industrial; Total Length L:179.4 mm; Shaft Size d:1 1/2 in;

Housing Width:5.3 in; Dimension H2:242 mm; Note:This product line wa; Cor - Static Load Rating:51931 lbf; Dimension L:380 mm; Bolt Size:2 x M24; Dimension H:112 mm; Seal Type:Viton Single Lip; Bearing Type:Split Cylindrical Ex; Pillow/Plummer Block Style:Split Cylindrical Ho;

G1 - Heat Generation Factor (Roller-Raceway):5.8; Bearing Weight:0.10 Kg; Db - Cup Backface Backing Diameter:38.10 mm; R - Cone Backface To Clear Radius1:1.520 mm; Cup Part Number:05175; Da - Cup Frontface Backing Diameter:42.40 mm; Cone Part Number:05062; r - Cup Backface To Clear Radius2:1.52 mm;

Designation of housing:FLZ209-; C:31.85 kN; C0:20.8 kN; S:10.2 mm; s1:20.6 mm; Weight:1.85 kg; B:41.2 mm; H3:105; Recommended tightening torque for set screw:11.5 Nm; N:14mm;

Bearing Used:Deep Groove Ball Bea; Bearing Material:Stainless Steel; Housing Material:[Aluminum Alloy] 201; Bearing Retained:No; Shape:Flange Type; Holder Surface Treatment:Clear Anodize; Number of Bearings:Double; Number of Bearings:Double; Bearing Part Number:6901; Type:Bearings with Housin;

N:14mm; L:163 mm; Designation of housing:PE207-; B:42.9 mm; G:R1/8"; H:47.6 mm; C:25.7 kN; N1:21 mm; T min.:-20 °C; A:45 mm;

A:60 mm; L1:65 mm; Z:76 mm; N:20mm; C:35.1 kN; Dz:100 mm; L:206 mm; C0:23.2 kN; T max.:100 °C; Designation of open end cover:SCOU210-30;

Designation of bearing:UC203G2T20; B:31 mm; T max.:200 °C; A2:37.3 mm; A:29.5 mm; G:R1/8"; C:12.8 kN; e:19 mm; Designation of housing:FE204N-; s1:15.5 mm;

Unit Body Material:Cast Iron; Pillow Type, Category:Narrow Width; Bearing Unit, Type:Pillow Type; Stroke:No; Diameter series symbol:Used for Light load; Unit Body Material:Cast Iron; Rolling Element Material:Bearing Steel; Basic Load Rating, Dynamic Rating(N):14000; Fit:J7; Grease Type:Standard Grea

Width T(mm):30 ～ 40; Shape:Flanged Pilot Type; Bearing Part Number:625; Housing Material:[Aluminum Alloy] 201; Bearing Retained:Yes (with retaining; Days to Ship:7 Days; Flange O.D. H(φ):40; Seals:ZZ (Double Shield); Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel;

L:162 mm; Z:68.6 mm; C0:29.2 kN; B:55.6 mm; Designation of open end cover:SCOU211-34; T max.:100 °C; G:R1/8"; J:130 mm; S:22.2 mm; N:18mm;

H:117 mm; G:R1/8"; A:24 mm; Weight:1.11 kg; T max.:100 °C; B:23.8 mm; C:19.5 kN; B1:35.7 mm; Recommended tightening torque for set screw:8 Nm; S:9 mm;

Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Holder Surface Treatment:Black Oxide Coating; Shape:Flange Type; Flange O.D. H(φ):44; Bearing Retained:No; RoHS:6; Flange Shape:Square Type; Bearing I.D. d(mm):15; Seals:DD (Contact Rubber S;